SUMMARY
- Mercedes-Benz electric vehicles combine traditional collision-repair needs with high-voltage batteries, EV-specific structures, advanced electronics, thermal-management systems, and ADAS technology.
- Mercedes-Benz has a dedicated Mercedes-EQ Certified Collision Program because EV repair requires specialized tools, equipment, procedures, and technicians trained specifically for Mercedes-EQ vehicles.
- Mercedes-Benz program standards state that EV and hybrid vehicles requiring collision repair must be handled by a Mercedes-EQ Certified Collision Center or be managed through specific high-voltage power-down procedures and repair restrictions.
- Non-Mercedes-EQ certified facilities are restricted from performing certain repairs involving cutting, bonding, riveting, or welding unless the vehicle is transferred to an appropriately certified facility.
- High-voltage systems require specialized safety procedures because shutting off the ignition does not remove stored energy from the battery.
- Mercedes-Benz EVs can require manufacturer-specific procedures for battery inspection, structural repair, refinishing, diagnostic scanning, ADAS calibration, and high-voltage system verification.
- Mercedes-Benz Certified Collision Centers use technicians trained to restore vehicles with the proper parts, tools, equipment, and Mercedes-Benz repair information.
- Prestige Auto Collision is a Mercedes-Benz Elite Certified Collision Repair facility in Mission Viejo and states that it uses factory-trained technicians, genuine Mercedes-Benz parts, diagnostic equipment, welding systems, and frame-alignment technology.
- Prestige Collision Group also provides EV and hybrid repair using specialized training, insulated tools, battery diagnostics, ADAS recalibration, and post-repair diagnostics.
- Mercedes-Benz EV owners in Mission Viejo can visit Prestige Auto Collision at 23726 Via Fabricante, Mission Viejo, CA 92691, United States.
Why Is Mercedes-Benz EV Collision Repair Different?
A Mercedes-Benz electric vehicle can suffer familiar collision damage.
You may see:
- A dented fender
- A cracked bumper
- A damaged door
- A broken headlight
But underneath those exterior panels, a Mercedes-EQ vehicle can contain systems that make the repair very different from repairing a conventional gasoline-powered vehicle.
Depending on the model, technicians may need to consider:
- High-voltage battery
- High-voltage cables
- Electric drive units
- Battery cooling
- Advanced structural materials
- ADAS cameras and radar
- EV-specific diagnostics
That is why Mercedes-Benz created a dedicated collision-repair certification tier for electric vehicles.
Mercedes-Benz describes its Mercedes-EQ Certified Collision Program as a repair tier specifically designed for the proper restoration of Mercedes-Benz electric vehicles. The program requires participating repair facilities to have specialized tools and equipment and dedicated technicians trained in Mercedes-EQ repair.
For Mission Viejo owners, this means choosing the right collision repair facility is about much more than whether a shop can repair the visible dent.
What Is Mercedes-EQ?
Mercedes-EQ is Mercedes-Benz’s electric-vehicle family and EV technology designation.
Depending on the model and market, the lineup can include vehicles such as:
- EQB
- EQE
- EQS
and other electrified Mercedes-Benz vehicles.
These vehicles may share familiar Mercedes-Benz styling and safety philosophy, but the propulsion systems differ substantially from conventional gasoline models.
Instead of relying primarily on:
- Internal combustion engine
- Fuel system
- Exhaust
an EV depends on:
- High-voltage battery
- Electric drive unit
- Inverter
- Charging system
- Thermal-management system
Those systems affect how the vehicle needs to be handled after a collision.
Why Did Mercedes-Benz Create a Separate EV Collision Certification?
Mercedes-Benz explicitly says Mercedes-EQ vehicles differ from other Mercedes-Benz vehicles in areas including:
- Safety systems
- Technology
- Batteries
- Parts.
That is why the Mercedes-EQ Certified Collision Program requires:
- Specific equipment
- Specialized training
- EV-qualified technicians
rather than assuming that experience with conventional Mercedes-Benz body repair is enough.
Mercedes-Benz’s own program standards also establish restrictions on what non-Mercedes-EQ certified facilities may perform on damaged EVs.
What Does Mercedes-Benz Require for EV Collision Repair?
Mercedes-Benz’s published Certified Collision Program Standards state that electric and hybrid vehicles requiring collision repairs are to be repaired by a Mercedes-EQ Certified Collision Center.
If a facility does not have Mercedes-EQ certification, the standards say it must either:
- Release the vehicle to a Mercedes-EQ Certified facility, or
- Work with its sponsoring dealership to power down the high-voltage battery before certain limited repairs.
Mercedes-Benz further states that a non-Mercedes-EQ certified collision center should not perform work requiring:
- Cutting
- Bonding
- Riveting
- Welding.
That is a significant distinction.
It shows that EV certification affects what kinds of repairs a facility is authorized to perform, not merely the logo displayed on the shop wall.
Why Are High-Voltage Systems the Biggest Difference?
A Mercedes-Benz EV stores substantial electrical energy in its high-voltage battery.
That system can power:
- Electric drive motors
- Charging components
- Thermal-management systems
- Other high-voltage accessories
The battery remains an energy source even if:
- The vehicle is turned off
- The key is removed
- The dashboard is dark
That means technicians need defined procedures for:
- High-voltage shutdown
- Isolation
- Verification
- Reconnection
before certain repairs can safely proceed.
Can Any Technician Disconnect a Mercedes-Benz EV Battery?
No.
High-voltage procedures should be performed by appropriately trained personnel following Mercedes-Benz repair information.
This is one of the core reasons certified facilities matter.
Mercedes-Benz’s Mercedes-EQ certification program specifically requires trained technicians who have completed EV-specific courses.
The procedure cannot be treated like disconnecting a conventional 12-volt battery.
What Does “Power Down the High-Voltage Battery” Mean?
Powering down a high-voltage system generally involves more than switching off the vehicle.
Technicians may need to:
- Follow manufacturer shutdown instructions
- Isolate the high-voltage system
- Observe specified waiting periods
- Verify absence of hazardous voltage
The exact process depends on the vehicle.
Mercedes-Benz program standards explicitly reference high-voltage battery power-down as a prerequisite when a non-Mercedes-EQ certified facility performs certain limited work.
Why Can’t Collision Shops Use a Generic EV Shutdown Procedure?
Because EV architectures differ.
The:
- Service disconnect
- Battery contactors
- Isolation steps
- Waiting periods
- Verification procedures
can vary by vehicle.
Technicians need the manufacturer-specific procedure for the exact Mercedes-Benz EV being repaired.
That is one reason Mercedes-Benz gives certified collision centers access to technical resources through systems such as its collision-center portal and Xentry resources.
Does Every Mercedes-Benz EV Collision Damage the Battery?
No.
A damaged:
- Door
- Fender
- Bumper
does not automatically mean the high-voltage battery is damaged.
Battery inspection becomes more important when the impact involves:
- Underbody
- Rocker panels
- Floor structure
- Battery enclosure
- Battery mounting points
- Cooling components
The technician should evaluate the specific damage rather than assume either:
“The battery must be bad.”
or
“The battery is fine because the car still drives.”
Why Is the Battery Enclosure Important?
The high-voltage battery pack is typically protected by a substantial enclosure.
That enclosure helps protect:
- Battery cells
- Electrical components
- Cooling systems
from road and collision damage.
An impact can affect:
- Enclosure surface
- Seams
- Mounting points
- Adjacent structure
Manufacturer-specific inspection criteria determine whether the damage is:
- Acceptable
- Repairable
- Grounds for additional battery evaluation
A certified shop should use Mercedes-Benz repair information rather than visual guesswork.
Can a Mercedes-Benz EV Battery Look Fine but Still Need Inspection?
Yes.
Exterior appearance alone may not tell technicians everything about:
- Battery mounting
- Cooling
- Internal fault conditions
Depending on the accident, evaluation may require:
- Diagnostic scanning
- Physical inspection
- High-voltage testing
- OEM procedures
That is another reason EV collision repair involves both body technicians and electronic diagnostic capability.
Why Does EV Structural Repair Require Special Attention?
A Mercedes-Benz EV’s structure can be closely integrated with the battery system.
Structural areas can help:
- Protect the passenger compartment
- Protect the battery
- Manage crash forces
- Support suspension
A collision affecting:
- Rocker
- Floor
- Rails
- Pillars
may therefore have implications beyond panel alignment.
The repair needs to restore the vehicle according to Mercedes-Benz structural procedures.
Why Does Mercedes-Benz Restrict Cutting and Welding at Non-EQ Facilities?
Cutting, welding, bonding, and riveting can involve:
- Significant structural repair
- Heat
- Electrical isolation
- High-voltage proximity
Mercedes-Benz’s certified collision standards specifically state that non-Mercedes-EQ certified centers should not perform work requiring these operations on Mercedes-Benz electric or hybrid vehicles.
That is a strong indication that the manufacturer considers those procedures sufficiently specialized to require the dedicated EV certification tier.
Does Aluminum Repair Matter on Mercedes-Benz EVs?
Potentially.
Mercedes-Benz vehicles can use aluminum in various:
- Body panels
- Structural components
Mercedes-Benz program standards separately state that vehicles requiring aluminum welding must be repaired by an Elite Certified Collision Center.
Aluminum repair can require:
- Dedicated tools
- Specialized welding equipment
- Training
- Contamination control
Prestige Auto Collision is listed as Mercedes-Benz Elite Certified, giving it certified capability for these more advanced structural repairs.
Why Is Mercedes-Benz Elite Certification Important?
Prestige Auto Collision states that its Mercedes-Benz certification includes:
- OEM-approved repairs
- Genuine Mercedes-Benz parts
- Factory-trained technicians
- Manufacturer-required diagnostic equipment
- Welding systems
- Frame alignment technology.
Mercedes-Benz also explains that its certified collision centers use specially trained technicians and the appropriate parts and equipment to restore Mercedes-Benz vehicles after collisions.
For EV owners, those capabilities become particularly important because body, structural, diagnostic, and electrical repair can overlap.
Are Genuine Mercedes-Benz Parts Important on EV Repairs?
They can be.
Mercedes-Benz-certified repairs may involve parts that interact with:
- Structure
- Battery protection
- ADAS
- Body fit
- Electronics
Prestige Auto Collision states that its certified Mercedes-Benz repairs use genuine Mercedes-Benz parts designed for proper vehicle fit and function.
The appropriate part still depends on:
- Vehicle
- Damage
- OEM procedure
But a certified repair program generally helps ensure that parts selection follows manufacturer requirements.
Can EV Repairs Affect ADAS?
Yes.
Mercedes-Benz EVs can contain advanced driver-assistance features involving:
- Cameras
- Radar
- Ultrasonic sensors
These may support:
- Automatic emergency braking
- Adaptive cruise control
- Lane keeping
- Blind-spot monitoring
- Parking assistance
A collision can affect:
- Sensor
- Bracket
- Wiring
- Mounting position
even when the sensor itself is not visibly broken.
Why Can Bumper Damage Affect Mercedes-Benz ADAS?
Modern bumper assemblies may contain or sit in front of:
- Radar
- Parking sensors
- Wiring
A collision can shift:
- Sensor bracket
- Bumper structure
- Radar position
That can create repair or calibration requirements.
This means a damaged bumper is no longer always a purely cosmetic plastic repair.
Does Every Mercedes-Benz EV Collision Require ADAS Calibration?
No.
Calibration depends on:
- Vehicle
- Installed equipment
- Damaged area
- Components removed
- Components replaced
- Alignment
- OEM procedure
A minor dent far from any sensor may not require calibration.
A bumper or windshield repair involving sensor systems might.
Prestige Auto Collision provides in-house ADAS recalibration at its Mission Viejo facility.
Why Can Windshield Replacement Affect Mercedes-Benz EV Systems?
Many Mercedes-Benz vehicles use forward-facing cameras near the windshield.
These can support:
- Lane assistance
- Forward collision systems
- Sign recognition
Replacing the windshield can affect the relationship between the camera and road.
Depending on the specific Mercedes-Benz procedure, calibration may be required after:
- Windshield replacement
- Camera removal
- Camera replacement
That requirement needs to be identified during repair planning.
Why Is Diagnostic Scanning Important?
Mercedes-Benz EVs contain many electronic control modules.
These can monitor:
- Battery
- High-voltage systems
- ADAS
- Airbags
- Brakes
- Steering
- Power electronics
A diagnostic scan can reveal issues that are not visible from outside.
Prestige Collision Group states that EV and hybrid repairs include battery diagnostics and post-repair diagnostic checks.
What Is a Pre-Repair Scan?
A pre-repair scan communicates with the vehicle before major repairs begin.
It can help identify:
- Diagnostic trouble codes
- Communication faults
- Battery-system messages
- Sensor concerns
This creates a more complete baseline for repair planning.
The scan does not replace:
- Physical inspection
- Structural measurement
It adds information about the vehicle’s electronic systems.
Why Is Post-Repair Scanning Important?
After the repair, technicians need to confirm that electronic systems are communicating correctly and that collision-related issues have been addressed.
Depending on the vehicle, post-repair diagnostics can help identify:
- Remaining faults
- Calibration needs
- Electronic issues
Prestige Auto Collision lists post-repair diagnostics as part of its EV repair capabilities.
Can a Clean Scan Prove the Entire EV Repair Is Correct?
No.
A scan cannot evaluate:
- Paint quality
- Panel gaps
- Structural dimensions
- Physical weld quality
Likewise, an excellent-looking exterior does not prove:
- High-voltage systems
- ADAS
- Electronics
are functioning correctly.
EV collision repair requires several types of verification.
Why Does Wheel Alignment Matter on a Mercedes-Benz EV?
A collision involving:
- Wheel
- Suspension
- Steering
can affect wheel alignment.
Correct geometry matters for:
- Handling
- Tire wear
- Vehicle trajectory
It may also be relevant to some ADAS calibration procedures.
Prestige Auto Collision states that its Mission Viejo operation provides advanced mechanical and alignment capability alongside collision repair.
Why Does EV Weight Matter During Collision Repair?
Battery-electric vehicles can weigh more than comparable gasoline vehicles because of the battery pack.
That can affect:
- Vehicle lifting
- Structural repair equipment
- Suspension
- Tires
A shop needs equipment rated and configured appropriately for the vehicle being repaired.
Correct vehicle lift points are especially important because the battery may occupy a large portion of the underbody.
Can a Shop Lift a Mercedes-Benz EV Anywhere Underneath?
No.
Technicians should use manufacturer-specified:
- Lift points
- Support locations
Improper lifting could potentially damage:
- Battery enclosure
- Underbody components
Certified repair facilities have access to vehicle-specific information that identifies how the vehicle should be safely lifted and supported.
Why Does Battery State of Charge Matter?
Some EV repair procedures may specify battery state-of-charge requirements for:
- Storage
- Repair
- High-voltage work
The exact percentage varies by:
- Vehicle
- Procedure
Technicians should follow Mercedes-Benz instructions rather than use one universal rule for every EV.
Can Paint Booth Heat Affect an EV?
Potentially.
EV manufacturers may place requirements on:
- Battery condition
- Paint-booth temperature
- Heating duration
when a complete vehicle enters a heated refinishing environment.
A certified repair shop should check the Mercedes-Benz repair procedure before using:
- Bake cycles
- Elevated temperatures
on an EV.
Why Is Refinishing an EV More Than a Cosmetic Step?
Refinishing can affect areas near:
- Radar sensors
- Cameras
- Parking sensors
Paint thickness and repair materials can sometimes interact with sensor function.
The shop therefore needs to understand where ADAS components are located before completing bumper or sensor-area refinishing.
Prestige Auto Collision states that its Mercedes-Benz certified repairs use factory-approved repair methods and professional refinishing systems.
Why Is a Dedicated EV Repair Bay Useful?
EV repairs can require controlled handling of:
- High-voltage components
- Insulated tools
- Specialized equipment
Prestige Collision Group states that its EV and hybrid repair program uses specialized training, insulated tools, and dedicated repair bays to reduce electrical risks.
Those resources can help keep:
- Technician safety
- Vehicle safety
- Repair organization
under better control.
Why Are Insulated Tools Important?
High-voltage electrical systems require tools designed to reduce electrical risk during applicable procedures.
Regular metal hand tools are not automatically appropriate for high-voltage work.
A certified EV facility may use:
- Insulated tools
- Protective equipment
- Voltage-rated equipment
when Mercedes-Benz procedures require them.
Can a Mercedes-Benz EV Be Driven After a Collision?
Sometimes.
But do not continue driving if you notice:
- High-voltage warning messages
- Smoke
- Unusual heat
- Fluid leaks
- Significant underbody damage
- Steering problems
- Tire damage
When the vehicle’s condition is uncertain, professional towing may be safer.
Tell the towing provider that the vehicle is:
electric
so manufacturer-specific transportation requirements can be followed.
Why Is EV Towing Different?
Some EVs have towing restrictions related to:
- Drive motors
- Wheel position
- Battery damage
Improper towing can potentially cause additional vehicle damage.
The towing provider should follow the specific Mercedes-Benz instructions for the model involved.
Can a Damaged EV Require Special Storage?
Potentially.
A vehicle with suspected battery damage may require additional precautions involving:
- Storage location
- Separation from other vehicles
- Monitoring
The correct precautions depend on:
- Collision
- Battery condition
- Mercedes-Benz procedures
Not every Mercedes-Benz EV involved in an accident requires special isolation.
The condition needs to be assessed.
Can Mercedes-Benz EV Repairs Take Longer?
Sometimes.
EV repair time can increase because technicians may need to complete:
- High-voltage procedures
- Diagnostics
- Battery inspection
- Structural repairs
- ADAS calibration
Parts availability can also affect timing.
But an EV does not automatically take longer simply because it is electric.
The timeline depends on the actual damage.
Can EV Collision Repairs Cost More?
Potentially.
Repair costs can be influenced by:
- Specialized labor
- High-voltage procedures
- Battery components
- Advanced structure
- ADAS calibration
- Specialized parts
However, a minor bumper repair on an EV may still cost much less than a severe structural repair on a gasoline vehicle.
The actual damage matters more than the propulsion system alone.
Can Battery Damage Cause a Total Loss?
It can contribute to one.
The high-voltage battery is one of the most expensive components on many electric vehicles.
If a collision requires:
- Battery replacement
- Extensive structural repair
- Multiple electronic components
the repair estimate can rise substantially.
The insurer then evaluates:
- Repair cost
- Vehicle value
- Policy
to determine whether the vehicle remains economically repairable.
Battery involvement does not automatically mean the vehicle will be totaled.
Why Can the Estimate Change After Disassembly?
The initial estimate may be based on visible damage.
After technicians remove:
- Bumper
- Underbody panels
- Interior trim
they may discover:
- Structural damage
- High-voltage component concerns
- Damaged cooling components
- Sensor brackets
Those additions can lead to a supplemental insurance estimate.
Prestige Auto Collision provides insurance claim management to coordinate repair documentation and communication with insurance carriers.
Can Insurance Require a Non-Certified Repair Shop?
An insurer may recommend specific repair facilities.
But Mercedes-Benz’s own repair standards remain relevant to the technical repair.
For an EV that needs:
- Structural cutting
- Bonding
- Riveting
- Welding
Mercedes-Benz program standards specifically call for Mercedes-EQ certified repair capability.
The key question is not merely:
“Which shop is on the insurer’s list?”
It is:
“Which facility has the certification and capability Mercedes-Benz requires for this repair?”
Why Does Mercedes-Benz Certification Matter for Insurance Documentation?
A certified shop can support its repair plan with:
- Manufacturer procedures
- Diagnostic findings
- Required equipment
- Certified repair standards
That can be useful when explaining to an insurer why the repair needs:
- Specific parts
- High-voltage procedures
- Structural operations
- Calibration
The insurer still determines:
- Coverage
- Payment
The shop determines the technical repair requirements.
Why Should Owners Keep EV Repair Documentation?
Keep:
- Estimate
- Supplements
- Final invoice
- Parts documentation
- Diagnostic scan reports
- Calibration reports
- Alignment documentation
- Warranty
For an EV, these documents can be particularly useful because many important repair procedures are not visible after reassembly.
A future technician cannot necessarily tell by looking at the exterior whether:
- Battery evaluation
- ADAS calibration
- Post-repair scan
was performed.
Documentation provides that history.
What Should You Ask Before Choosing a Mercedes-Benz EV Repair Facility?
Ask:
- Are you Mercedes-Benz certified?
- Are you qualified for Mercedes-Benz EV collision repair?
- Who handles high-voltage shutdown?
- Do you have Mercedes-Benz diagnostic equipment?
- Can you perform structural EV repair?
- Are you equipped for aluminum repair if required?
- Can you calibrate ADAS?
- Will you use genuine or approved Mercedes-Benz parts?
- Will I receive scan and calibration documentation?
The answers can tell you far more than simply asking:
“Do you repair electric cars?”
What Questions Should You Ask About the Battery?
Consider asking:
- Was the battery enclosure inspected?
- Was there underbody damage?
- Did the high-voltage system require isolation?
- Were any battery-related diagnostic codes present?
- Did Mercedes-Benz require additional testing?
These questions are especially relevant after:
- Underbody impact
- Significant side collision
- Structural damage
What Should You Check When Picking Up the Vehicle?
Perform a basic walkaround.
Check:
- Paint
- Panel gaps
- Trim
- Lights
- Doors
- Hood
- Trunk
Inside, look for:
- Warning messages
- ADAS alerts
- High-voltage system warnings
During the first drives, pay attention to:
- Steering
- Alignment
- Adaptive cruise
- Lane assistance
- Parking sensors
- New noises
Contact the repair facility if anything behaves differently from before the accident.
Why Choose Prestige Auto Collision for Mercedes-Benz EV Repair?
Prestige Auto Collision in Mission Viejo is a Mercedes-Benz Elite Certified Collision Repair facility.
Its Mercedes-Benz program includes:
- Factory-trained technicians
- Genuine Mercedes-Benz parts
- OEM-approved repair procedures
- Advanced diagnostic tools
- Approved welding systems
- Frame alignment technology.
Prestige Collision Group also states that its EV and hybrid collision repairs include:
- High-voltage system knowledge
- Battery diagnostics
- Specialized tools
- ADAS recalibration
- Post-repair diagnostics.
The Mission Viejo facility additionally provides in-house ADAS recalibration and OEM-approved EV and hybrid repair procedures.
Learn more about Prestige Auto Collision’s Mercedes-Benz certification or its broader OEM certification program.
Frequently Asked Questions
Why does Mercedes-Benz EV collision repair require a certified facility?
Mercedes-Benz EVs contain high-voltage systems, specialized structures, advanced electronics, and batteries that require manufacturer-specific tools and training. Mercedes-Benz’s published program standards direct electric and hybrid collision repairs to Mercedes-EQ Certified Collision Centers for applicable repairs.
Can any Mercedes-Benz Certified Collision Center repair a Mercedes-EQ vehicle?
Not necessarily. Mercedes-Benz’s program standards distinguish general collision certification from its dedicated Mercedes-EQ repair level. Certain EV repairs require Mercedes-EQ certified capability.
Can a non-EQ certified facility weld a Mercedes-Benz EV?
Mercedes-Benz’s published collision standards state that non-Mercedes-EQ certified centers should not perform EV repairs requiring cutting, bonding, riveting, or welding.
Does every Mercedes-Benz EV accident damage the battery?
No. Battery inspection becomes particularly important when the collision affects the underbody, battery enclosure, structural mounting areas, or related systems.
Does a Mercedes-Benz EV need ADAS calibration after every collision?
No. Calibration depends on the vehicle, systems installed, damage, repairs performed, alignment, and OEM procedures.
Why is high-voltage shutdown important?
The battery can retain substantial electrical energy even when the vehicle is turned off. Proper high-voltage isolation helps protect technicians and supports safe repair procedures.
Does Prestige Auto Collision repair Mercedes-Benz EVs?
Prestige Auto Collision is a Mercedes-Benz Elite Certified Collision Repair facility and Prestige Collision Group provides specialized EV and hybrid repair capabilities using OEM procedures, battery diagnostics, high-voltage training, and ADAS recalibration.
Where can I get certified Mercedes-Benz collision repair in Mission Viejo?
Prestige Auto Collision provides Mercedes-Benz-certified collision repair at 23726 Via Fabricante, Mission Viejo, CA 92691, United States.
Mercedes-Benz EV Repairs Need the Right Training, Equipment, and Procedures
A Mercedes-Benz EV can look familiar from outside.
But beneath the bodywork is a vehicle built around:
- High-voltage battery technology
- EV-specific structure
- Advanced electronics
- ADAS
That changes the collision repair process.
Mercedes-Benz itself recognizes those differences through a dedicated Mercedes-EQ Certified Collision Program requiring specialized equipment and technicians trained specifically for EV repair.
The company’s published collision standards go even further by restricting certain structural operations, including cutting, bonding, riveting, and welding, when a facility does not have the appropriate Mercedes-EQ certification.
For Mercedes-Benz owners in Mission Viejo, Prestige Auto Collision provides certified collision repair, professional auto body repair, and insurance claim management at:
Prestige Auto Collision
23726 Via Fabricante Mission Viejo, CA 92691, United States
You can also review its Mercedes-Benz OEM certification, visit the Mission Viejo location page, or request an estimate.
